EMC Triggered 2-particle Correlation Studies

Speaker : Lee Barnby (for Essam Elhalhuli)


Talk time : 12:20, Duration : 00:10

Update on auto-correlations in Cu+Cu

Speaker : Rene Bellwied


Talk time : 11:50, Duration : 00:30

QM Poster Preview

Speaker : Dhevan Gangadharan ( UCLA )


Talk time : 11:30, Duration : 00:20

QM Talk Rehearsal & Discussion

Speaker : Xiaobin Wang ( Tsinghua )


Talk time : 10:00, Duration : 01:30

Strangeness parallel session

2008-01-30 10:00
2008-01-30 12:30
Etc/GMT
Wednesday, 30 January 2008
IIT, Mumbai (Collaboration Meeting), at 15:00 (GMT), duration : 02:30
TimeTalkPresenter
10:00QM Talk Rehearsal & Discussion ( 01:30 ) 0 filesXiaobin Wang (Tsinghua)
11:30QM Poster Preview ( 00:20 ) 0 filesDhevan Gangadharan (UCLA)
11:50Update on auto-correlations in Cu+Cu ( 00:30 ) 0 filesRene Bellwied
12:20EMC Triggered 2-particle Correlation Studies ( 00:10 ) 1 fileLee Barnby (for Essam Elhalhuli)

More on MC

We've generated the following MC datasets, all located in /star/institutions/mit/corliss/magic_single_particle/

Further QA Plots

See the pdfs attached below, each covering 1000 events of the given particle type in the given detector.  Page 1 has the standard MC QA plots, page 2 has plots for MC primary tracks only, page 3

WillJacobs-FGT-HN-Uploads

Under:
  • hmmm, says that  "body Field is required"
  • ok, here is a two-liner (BTW I clicked also "FGT in STAR* box)

FGT. . . . . . . . . . x -T R A S H (node for recycling)

Under:

Any child pages belonging here is a trash.
Note only the owner can recycle them by attaching to a new mother-page and changing the title,URL, and content.

Jan

ReneeFatemi-FGT-HN-Uploads

bad dog!

gvisser-FGT-HN-Uploads

Under:

The following links are "attachments" for FGT hypernews archive
----------------------------------------------------------------------------------------

fgt-subpage-test-Renee

Under:

this is my link to my previous blog

AdamKocoloski-FGT-HN-Uploads

Under:

FGT HN Upload Summary Table

balewski.1. Miro_PCBoard.pdf [PDF, 54.29 KB] May 15 2009 18:07:57.
balewski.2. Miro-apv_brd_pcb.pdf [PDF, 176.16 KB] May 15 2009 18:15:13.
balewski.3. 2008-10-FGT-DNPv1.pdf [PDF, 5.25 MB] May 15 2009 18:14:40.

gvisser.1. Slides from Miro, for FGT phone meeting, friday 2/8/2008 [PDF, 349.33 KB] May 15 2009 18:08:17.
gvisser.2. FGT & SSD electrical services materials budget - PRELIMINARY [VND.MS-EXCEL, 21 KB] May 15 2009 18:04:45.
gvisser.3. First quote for aluminum-based cable for ALL FGT SERVICES - MAX 7.24mm OD - technical details may be changed still [PDF, 36.83 KB] May 15 2009 18:07:39.
gvisser.4. [from Doug] Draka # HTC-50-1-1, 5kVdc cable (CERN spec) [PDF, 79.46 KB] May 15 2009 18:11:46.

miro.1. M_brd Quote Proto.pdf [PDF, 32.24 KB] May 15 2009 18:08:05.
miro.2. apv_board_doc.pdf [PDF, 67.31 KB] May 15 2009 18:22:36.
miro.3. apv_board_pcb.pdf [PDF, 112.81 KB] May 15 2009 18:17:32.
miro.4. sig_board_doc.pdf [PDF, 49.27 KB] May 15 2009 18:22:38.
miro.5. sig_board_pcb.pdf [PDF, 53.45 KB] May 15 2009 18:06:49.
miro.6. mechtest_pcb.pdf [PDF, 38.23 KB] May 15 2009 18:07:01.
miro.7. mechtest_doc.pdf [PDF, 86.36 KB] May 15 2009 18:03:40.
miro.8. mechtest_quote.pdf [PDF, 62.77 KB] May 15 2009 18:03:29.
miro.9. mechtrim_pcb.pdf [PDF, 107.18 KB] May 15 2009 18:11:34.
miro.10. pwr_board_pcb.pdf [PDF, 34.17 KB] May 15 2009 18:06:57.

pagebs.1. VertexPosition_mit0001_33_4000evts.jpg [JPEG, 43.64 KB] May 15 2009 18:06:30.
pagebs.2. OPcountsQCD.png [PNG, 13.65 KB] May 15 2009 18:15:29.
pagebs.3. OPcountsW.png [PNG, 17.83 KB] May 15 2009 18:04:16.
pagebs.4. ETspectrumQCD.png [PNG, 16.2 KB] May 15 2009 18:08:59.
pagebs.5. ETspectrumW.png [PNG, 17.87 KB] May 15 2009 18:15:36.
pagebs.6. IsoET01.png [PNG, 13.64 KB] May 15 2009 18:12:55.
pagebs.7. IsoET07.png [PNG, 13.88 KB] May 15 2009 18:14:05.
pagebs.8. TrigEToverIsoET01.png [PNG, 16.89 KB] May 15 2009 18:05:31.
pagebs.9. TrigEToverIsoET07.png [PNG, 17.61 KB] May 15 2009 18:10:40.
pagebs.10. TrigOverIso01.png [PNG, 16.4 KB] May 15 2009 18:07:03.
pagebs.11. TrigOverIso026.png [PNG, 15.03 KB] May 15 2009 18:21:17.
pagebs.12. TrigOverIso07.png [PNG, 16.88 KB] May 15 2009 18:21:22.
pagebs.13. geantAccessSample.txt [PLAIN, 916 bytes] May 15 2009 18:07:02.
pagebs.14. setC3detectedSpectra.png [PNG, 12.8 KB] May 15 2009 18:04:35.
pagebs.15. setC3thrownSpectra.png [PNG, 13.45 KB] May 15 2009 18:21:19.
pagebs.16. Abstract10-08V1.0.pdf [PDF, 18.53 KB] May 15 2009 18:04:45.
pagebs.17. v4.0_FinalSpectra.png [PNG, 13.65 KB] May 15 2009 18:17:35.
pagebs.18. Abstract10-08V1.3.pdf [PDF, 19.61 KB] May 15 2009 18:04:19.

wwjacobs.1. eemc_trigger_patches_annotated.pdf [PDF, 988.89 KB] May 15 2009 18:04:16.
wwjacobs.2. BPMT_BPRS 003.jpg [JPEG, 1.04 MB] May 15 2009 18:06:51.
wwjacobs.3. eemc_swingarm.pdf [PDF, 61.82 KB] May 15 2009 18:03:46.

wzhang.1. Sunset.jpg [JPEG, 69.52 KB] May 15 2009 18:04:49.
wzhang.2. disk123.gif [GIF, 19.86 KB] June 08 2009 14:04:09.
wzhang.3. backFgtHit.gif [GIF, 30.89 KB] June 08 2009 14:06:15.

Physics Background Simulation

Under:

Ongoing effort of preparing physics-background samples for developing of e/h discrimination algos for W reconstruction

test, according to Jan's request

this is a test entry
don't pay too much attention to it
here's another line
and another
not less than 5, Jan commands
so I do 6
 

PID Stability

I plot the nSigmaPion distributions for the 859 ppProduction and ppProductionMinBias runs passing 2005 jet QA. Tracks included in each histogram passed the following cuts:

  • pT > 2.0
  • |eta| < 1.0
  • |dcaG| < 1.0
  • nFitPoints > 25

Here’s a summary of the means from each run:

PID summary

I’ve also attached a PDF of the run-by-run plots at the bottom of the page (pid-stability.pdf). The group of runs around index 800 correspond to fill 7305 (highlighted in red on page 53 of the pid-stability PDF), and the large jump around index 95 coincides with the beginning of fill 7048.

I’m not so concerned about the latter group, as fills 7048 and 7055 were already excluded from analysis by the RHIC Polarimetry group. I am wondering, though, if it’s safe to analyze fill 7305. I tried the triple-Gaussian fit for data from this fill, which results in a 0.7 sigma offset for the pions. The Chi2/dof is certainly good enough:

F7305 recalibration

I went ahead and did these fits for every fill in my analysis and posted the results at the bottom of the page (pid-by-fill.pdf). The fit parameters were configured as

fit = ROOT.TF1('fit','gaus(0)+gaus(3)+gaus(6)', -6.0, 6.0)
fit.SetParameter(0, h.GetMaximum() * 0.9)
fit.SetParameter(1, 0.0)
fit.SetParameter(2, 1.0)
fit.SetParameter(3, h.GetMaximum() * 0.5)
fit.SetParameter(4, -1.0)
fit.SetParameter(5, 1.0)
fit.SetParameter(6, h.GetMaximum() * 0.05)
fit.SetParameter(7, 2.)
fit.SetParameter(8, 1.0)

I’m a little surprised at the fit results for these fills (i.e. pion means are often around -0.2 or lower), but I’m no expert when it comes to this stuff. Here’s a summary plot of means for the pion Gaussians in each of the fill-by-fill fits:

Fill Summary

Summary

nSigmaPion distributions are well-described in all cases by a triple-Gaussian fit, and are generally stable within a given RHIC fill. A few fills have distributions which appear to be shifted relative to the remainder of the dataset, in particular F7305.

Update 2008-02-05

I decided to change the PID selection window in my analysis to use the results of these fill-by-fill fits. Now, instead of using a fixed [-1,2] window in nSigmaPion, I center the window on my calculated pion mean for that fill, and the width of the window is normalized by the width of the pion Gaussian. The overall effect is hardly noticeable: pion identification efficiency (based on these fits) improves by 0.6%, and background p/K/e contamination drops by an even smaller amount. The actual numbers using my final runlist are

Efficiency: 81.9%
Background: 9.1%

Update 2008-03-07

I had been using the RunLog_onl DB to get fill/run mappings. I believe some entries in this database are incorrect; for more information, see this HN post. I just updated the results on this page to reflect what I now believe to be the correct mappings for fills 7127, 7128, 7129, 7134, 7136, and 7138.

Data Sample

WORK IN PROGRESS

The analysis uses 839 runs, totaling 7,965,962 events (MB|JP1|JP2), 2,073,334 pions, and 2.2 pb^-1 of integrated luminosity. The run QA effort builds on the work of the jetfinding group, documented here. In addition to the QA requirements imposed by the jet group, I checked the stability of the dE/dx distributions. That work is documented here, but in summary I concluded that the PID information is usable in all the runs that passed jet QA, and that the PID window should be centered on the mean of the pion Gaussian for each fill.

Event Cuts

  • BBC online time difference in [7,8,9]
  • spin DB (StSpinDbMaker) says spin information is OK for bunch crossing
  • online trigger in [96011, 96221, 96233]
  • offline trigger emulator agrees with online trigger decision

Track Cuts

  • pT > 2.0
  • |eta| < 1.0
  • |dcaG| < 1.0
  • nFitPoints > 25
  • nSigmaPion in the range [-1,2] * sigma centered on pion mean

Ideas for more information here

  • event counts by trigger and/or trigger overlap
  • histogram showing effect of each cut

2008-02-01

The council meeting will be held in India.

Photon Analysis Progress for the week of 1/21/08-1/25/08

There were two issues to be dealt with this week.  First, we had trouble extracting the calorimeter information from the MuDst, which did not seem to have an StEmcCollection.  Initially we b