The STAR experiment

1) I updated the TPC-PXL sector overlap picture to reflect
   the true TPC arrangement, as per Xin's correction. I
   put the new picture in the meeting's Drupal page.
2) Flemming drafted a MS-Project schedule diagram for software
   and associated Milestones. I will at this in detail over
   the weekend.   
3) Flemming is preparing some drawings of the detector complex
   for the non-initiated folks, like me.
4) Jonathan is looking into tracking efficiency/ghosting with the
   prototype only. He has problems with every option he tries
   for the moment (some of them just resolved). There is going
   to be more discussion in this list about this stuff. It
   has been a while since we used this production chains and
   things got rusted.
5) I have asked for CMM time during the Collab. meeting since
   we are going to be there anyway.
6) I 've contacted Auguste about the slow simulator.
7) Jerome contacted me about updates. We are on in next week's
   S&C Wed meeting and also during the Friday morning plenary
   session at the Collab. meeting.

 

1) Geometry. Flemming produced a proportional sketch of the
   support structures. Posted it on Drupal's page.
2) Prototype tracking. Jonathan is getting close. He might
   post a couple of plots by the meeting's time.
3) PXL response. We got the DIGMAP code and some docs. What
   next?
4) The CERN beam test is successfully over. I put a picture
   he sent on Drupal

 

1) I made a short presentation at the S&C meeting yesterday:
http://drupal.star.bnl.gov/STAR/event/2011/11/02/software-and-computing-meeting/hft-software-status

2) Jonathan made progress on TPC+PXL tracking.

3) I got an email form Howard that the touch probe for the
  VIEW-3000 will ship Nov 11. There is no arrival date but
  we might be able to do something with it at the Collab.
  meeting. If not we will still learn about data formats
  etc of this device.

 

1) I know that Jonathan re-run the prototype
efficiency (acceptance) for  pt>0.3
(which is to make sure we have a reasonable
track reconstr.in the TPC). He is going to post

his file soon.

2) We are looking into optimizing the TPC+3sector PXL
   configuration. TPC has 12 sectors the PXL 3 out of 10.

We need to take care of the gaps (put the 3sectors)
   so we have only one TPC gap shadowing, and also make
   sure we have healthy TPC sectors. He has some drawings
   and there is work in progress here (use TPC state in last
   run as a basis).

3) He is making a list of volumes in Y2013 'blank' geometry.
   We are waiting for a drawing to be available for that
   year's support material but Flemming/Jim are big helpers
   in this (thanks guys). Jonathan is playing with this
   geometry.

4) There is some progress in reprocessing the old, Yifei's
   files with BFC and mask out IST/SSD hits (no material)
   plus PXL sector (hits). Later I will coordiante with
   Yifei to start a production with Hijing+D0s in Y2013a,b
   (a=Mercedes, b=All adjacent) with proper material, for
   accurate tracking excercises.

5) I posted a WBS Software schedule Flemming prepared. I
   still need to talk to him so I can understand the notation.

Send the list the items yoiu might have. S.