- My blog
- Post new blog entry
- Top bloggers
- Recent posts
Sort by:[Date]
vped confusion - 2018
Updated on Wed, 2018-02-14 15:58. Originally created by rjreed on 2018-02-14 00:46.We want to find a way to check the mapping of the epd from the FEEs through the QT. The idea is that if we change the vped setting in a given channel, we should see the pedestal shift. The
North-East EPD
Updated on Tue, 2018-02-13 17:47. Originally created by adams92 on 2018-02-13 17:40.Attached is a picture of the North side of the East EPD. It is to demonstrate the curvature in the fiber bundle attached to the Supersector in PP09.
Presentation to CME focus group
Updated on Tue, 2018-02-13 12:26. Originally created by lisa on 2018-02-13 12:26. Below find my slides, to be shown on 13 feb 2018
comparison with standard method
Updated on Tue, 2018-02-13 09:50. Originally created by kocmic on 2018-02-13 09:34.
Just some pictures for discussion
Updated on Mon, 2018-02-12 19:00. Originally created by lisa on 2018-02-12 18:55.12 Feb 2018
Signals from Rx slot 18, channel 12 (Feb. 12, 2018)
Updated on Mon, 2018-02-12 17:12. Originally created by adams92 on 2018-02-12 17:12.Attached are scope traces of Rx slot 18, channel 12, with the trigger set at -10 mV. The largest signal that I saw after roughly 10 minutes of watching was about -15 mV.
EPD schedule
Updated on Mon, 2018-02-12 09:29. Originally created by lisa on 2018-02-12 09:27. Here I keep some documents of the (much evolving) EPD schedule at the beginning of Run 2018
Replies to referees
Updated on Sun, 2018-02-11 14:02. Originally created by avossen on 2018-02-11 13:59.Attached are the responses to the referee,
EPD macros
Updated on Sun, 2019-01-20 22:37. Originally created by rjreed on 2018-02-10 19:41.The macros attached (with extensions of .txt that need to be changed to .C) can be used with some EPD functionality.